Click on image to zoom

OME-CS019R - Old Man Emu Dakar Rear Springs with bushings

OME-CS019R

OME-CS019R - Old Man Emu Dakar Rear Springs with bushings 

 

OME Dakar leaf springs feature:

  • Draw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly increasing the spring life.
  • Bolt Clamps & Liners: The leaf clamps are bolted to allow installation of anti squeak nylon liners.
  • Fully Scragged & Load Tested: Scragging ensures the spring takes a permanent 'set' which reduces the risk of sagging. Load testing ensures the spring meets the required specification.
  • Graphite Coating: To further reduce the friction between the spring leaves & friction pads.
  • Military Wrap: Designed to provide added safety.
  • Anti Friction Pads: Regreasable nylon interleaf liners reduce friction at the leaf tips where the load is the greatest.
  • Flat Axle Seat Area: Allows a positive, safe axle mount reducing spring stress & increasing spring life.
  • Shot Peening: The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring.
  • Two-stage Leaf Pack: Featured on most rear springs for optimum comfort. When unladen the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added.

Please note: Most Emu Dakar leaf springs have all the listed features, but where design or a physical limitation exists one or more of these features may not be incorporated. Please check with your OME licensed fitter for further information.

  • Fits '95.5-'97 Tacoma - Provides approximately 3- 3.5" of lift (Not recommended for single cab models)
  • Also fits 89 - 95 Toyota Pickup - Provides approximately 2" of lift
  • Will not fit T100

 

  • Sold complete as a pair with bushings and sleeves - Order quantity of 1 per vehicle
  • Includes SB43 bushings, 181469 sleeves  and (2) CS019R springs 

*May require new U bolts, order separately. Recommend 7.5" U-bolts.

** Rear Tailpipe relocation or modification required on Tacoma's**

** For 86-95 Pickup, if your Truck has 3.25" ID rear Ubolts, this kit will not fit your vehicle **  Not recommended for single cab or 4 cyl. Tacoma's.

Will not fit 5 lug Tacoma

Pricing: $417.00

Qty:
Free ground shipping lower 48 states (some exclusions may apply)

Description

'89 - '95 Toyota Pickup - Provides approximately 2" of lift
'95.5-'97 Tacoma Xtra Cab and Double Cab models - (6 lug) - Provides approximately 3- 3.5" of lift (Not recommended for single cab models)
Will not fit T100
Ride heights can vary depending on application and setup.

Notes:
May require new U bolts, order separately. Recommend 7.5" U-bolts.
Rear Tailpipe relocation or modification required on Tacoma's
Not recommended for single cab or 4 cyl. Tacoma's.
Extra Leaf part # D6XL can be fitted for heavier constant load carrying ability.
*Will not fit 5 lug Tacoma

Details

  • OME-CS019R
  • OME-CS019R
  • ARB/OME
  • New

Shipping Information

  • Item Requires Shipping
  • 60.0 lbs.
  • W12.0000” x H4.0000” x L58.0000”
  • Free ground shipping lower 48 states (some exclusions may apply)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.